How the decimal hours calculator works
Decimal hours express a duration as a fraction of one hour instead of an hours-and-minutes pair. Payroll and invoicing software almost always wants that form, because it can multiply a decimal by an hourly rate directly.
- Hours and minutes to decimal. The tool multiplies the hours by 60, adds the minutes, and divides the total by 60. 7 hours 45 minutes is 465 minutes, and 465 ÷ 60 = 7.75.
- Decimal to hours and minutes. The decimal is multiplied by 60 and rounded to the nearest whole minute. 7.75 × 60 = 465 minutes, which is 7 hours and 45 minutes. 0.83 × 60 = 49.8, which rounds to 50 minutes.
- Both directions stay in sync. Edit either side and the other is rewritten on the next keystroke. The decimal places selector changes how many digits the decimal side shows, not the underlying minutes.
Minutes over 59 are carried into the hours instead of being rejected, so 7 h 75 min is shown as 8.25 as soon as you type it. Everything runs in your browser with no rounding other than the nearest-minute step described above.
Formulas and rules
Minutes to decimal hours
total minutes = hours × 60 + minutes
// 45 min → 45 ÷ 60 = 0.75
Decimal hours back to hours and minutes
hours = floor(total minutes ÷ 60)
minutes = total minutes mod 60
// 7.75 × 60 = 465 → 7 h 45 min
The rounding matters. A decimal such as 7.83 is not 7 hours 49.8 minutes in practice: the converter rounds to 470 minutes and reports 7:50. That is the smallest step a timesheet can represent, so any rounding error is capped at 30 seconds per entry.
Which decimals matter for pay
// 7.75 h × $20.00 = $155.00 gross
Two decimals of an hour is 0.01 × 60 = 0.6 minutes, so a two-decimal timesheet is accurate to just over half a minute. Four decimals is accurate to 0.006 minutes and is only needed when you are aggregating many entries before rounding.
What decimal hours are not
Decimal hours are not decimal time. Decimal time divides the day into 10 hours of 100 minutes each; decimal hours keep the 24-hour day and the 60-minute hour and only change how the minutes are written. A 7.75 in this tool is seven and three-quarter standard hours.
Worked examples
1. 7:45 to decimal hours
total minutes = 7 × 60 + 45 = 465
decimal = 465 ÷ 60 = 7.75
2. 90 minutes in hours and minutes
back to h:mm: 1.50 × 60 = 90 → 1 h 30 min
// 90 minutes is not 0.90 hours
3. 7.83 decimal hours back to a clock duration
round to the nearest minute = 470
470 ÷ 60 = 7 remainder 50 → 7:50
Minute to decimal hour conversion table
Every minute from 0 to 60. The two-decimal column is what most payroll systems store; the four-decimal column is the exact value before rounding. The last column repeats the same minute count as h:mm for cross-checking a timesheet.
| Minutes | Decimal (2 dp) | Decimal (4 dp) | H:MM |
|---|---|---|---|
| 0 | 0.00 | 0.0000 | 0:00 |
| 1 | 0.02 | 0.0167 | 0:01 |
| 2 | 0.03 | 0.0333 | 0:02 |
| 3 | 0.05 | 0.0500 | 0:03 |
| 4 | 0.07 | 0.0667 | 0:04 |
| 5 | 0.08 | 0.0833 | 0:05 |
| 6 | 0.10 | 0.1000 | 0:06 |
| 7 | 0.12 | 0.1167 | 0:07 |
| 8 | 0.13 | 0.1333 | 0:08 |
| 9 | 0.15 | 0.1500 | 0:09 |
| 10 | 0.17 | 0.1667 | 0:10 |
| 11 | 0.18 | 0.1833 | 0:11 |
| 12 | 0.20 | 0.2000 | 0:12 |
| 13 | 0.22 | 0.2167 | 0:13 |
| 14 | 0.23 | 0.2333 | 0:14 |
| 15 | 0.25 | 0.2500 | 0:15 |
| 16 | 0.27 | 0.2667 | 0:16 |
| 17 | 0.28 | 0.2833 | 0:17 |
| 18 | 0.30 | 0.3000 | 0:18 |
| 19 | 0.32 | 0.3167 | 0:19 |
| 20 | 0.33 | 0.3333 | 0:20 |
| 21 | 0.35 | 0.3500 | 0:21 |
| 22 | 0.37 | 0.3667 | 0:22 |
| 23 | 0.38 | 0.3833 | 0:23 |
| 24 | 0.40 | 0.4000 | 0:24 |
| 25 | 0.42 | 0.4167 | 0:25 |
| 26 | 0.43 | 0.4333 | 0:26 |
| 27 | 0.45 | 0.4500 | 0:27 |
| 28 | 0.47 | 0.4667 | 0:28 |
| 29 | 0.48 | 0.4833 | 0:29 |
| 30 | 0.50 | 0.5000 | 0:30 |
| 31 | 0.52 | 0.5167 | 0:31 |
| 32 | 0.53 | 0.5333 | 0:32 |
| 33 | 0.55 | 0.5500 | 0:33 |
| 34 | 0.57 | 0.5667 | 0:34 |
| 35 | 0.58 | 0.5833 | 0:35 |
| 36 | 0.60 | 0.6000 | 0:36 |
| 37 | 0.62 | 0.6167 | 0:37 |
| 38 | 0.63 | 0.6333 | 0:38 |
| 39 | 0.65 | 0.6500 | 0:39 |
| 40 | 0.67 | 0.6667 | 0:40 |
| 41 | 0.68 | 0.6833 | 0:41 |
| 42 | 0.70 | 0.7000 | 0:42 |
| 43 | 0.72 | 0.7167 | 0:43 |
| 44 | 0.73 | 0.7333 | 0:44 |
| 45 | 0.75 | 0.7500 | 0:45 |
| 46 | 0.77 | 0.7667 | 0:46 |
| 47 | 0.78 | 0.7833 | 0:47 |
| 48 | 0.80 | 0.8000 | 0:48 |
| 49 | 0.82 | 0.8167 | 0:49 |
| 50 | 0.83 | 0.8333 | 0:50 |
| 51 | 0.85 | 0.8500 | 0:51 |
| 52 | 0.87 | 0.8667 | 0:52 |
| 53 | 0.88 | 0.8833 | 0:53 |
| 54 | 0.90 | 0.9000 | 0:54 |
| 55 | 0.92 | 0.9167 | 0:55 |
| 56 | 0.93 | 0.9333 | 0:56 |
| 57 | 0.95 | 0.9500 | 0:57 |
| 58 | 0.97 | 0.9667 | 0:58 |
| 59 | 0.98 | 0.9833 | 0:59 |
| 60 | 1.00 | 1.0000 | 1:00 |
For a duration longer than an hour, add the hours to the table value: 2 h 20 min = 2 + 0.33 = 2.33 h. Subtracting whole hours first keeps every conversion inside the table.
Frequently asked questions
How do you convert minutes to decimal hours?
Divide the minutes by 60. 15 minutes is 15 divided by 60 = 0.25 hours, 30 minutes is 0.50 hours, and 45 minutes is 0.75 hours.
How do you convert decimal hours back to hours and minutes?
Multiply the decimal by 60 to get total minutes, then split those minutes into whole hours and leftover minutes. 7.75 times 60 is 465 minutes, which is 7 hours and 45 minutes.
What is 7:45 in decimal hours?
7:45 is 7.75 decimal hours. 45 minutes divided by 60 is 0.75, and 7 plus 0.75 is 7.75.
What is 90 minutes in hours?
90 minutes is 1.50 decimal hours, or 1 hour 30 minutes. Anything over 59 minutes carries into the hours column, which is why 90 minutes is not 0.90 hours.
Why does one minute equal 0.0167 hours?
Because an hour has 60 minutes and 1 divided by 60 is 0.01666..., which rounds to 0.0167. The conversion table on this page lists every minute from 0 to 60 to four decimals.
Should I round decimal hours for payroll?
Most payroll systems store two decimals, so 7:45 stays 7.75 while 7:50 becomes 7.83. Rounding to two decimals can shift a timesheet by a fraction of a minute per entry, so check your employer's or payroll provider's rule before you round.
Are decimal hours the same as decimal time?
No. Decimal time would divide the day into 10 hours; this page converts ordinary clock time into a decimal fraction of an hour, which is what timesheets and invoices use. The day here is still 24 hours.
Does the converter send my numbers anywhere?
No. The conversion runs in your browser, the page makes no network requests, and nothing you type is stored.
Related tools
Time card calculator
Shifts, two unpaid breaks, overtime rules and gross pay for a full workweek.
DurationsTime calculator
Hours between two times, plus adding and subtracting durations.
Print firstTimesheet calculator
A printable pay-period timesheet with employer and employee fields.
ChannelTime & Pay
Every hours and pay tool on CalcChest, plus the rules behind them.